FILTER MAINTENANCETHE IGARDEN GLOSSARY

Cartridge Cleaning

Learn how to clean a pool filter cartridge, monitor pressure, remove oil and mineral deposits, avoid common mistakes and identify when replacement is needed.

Updated 2026-11-18

Cartridge cleaning is an essential part of pool filter maintenance. Pool filter cartridge cleaning removes accumulated contaminants from the filtration media, helping maintain effective water circulation and consistent filtration performance.

Understanding how to clean a pool filter cartridge, recognise when deeper cleaning is necessary and identify signs of deterioration helps Australian pool owners maintain their filtration equipment and avoid unnecessary cartridge replacements.

1. What Is Cartridge Cleaning?

Cartridge cleaning is the process of removing accumulated contaminants from a swimming pool filter cartridge so that water can pass through its filtration media efficiently.

Unlike sand filters, which commonly use backwashing to remove trapped debris, cartridge filters require the filter element to be removed and cleaned separately.

A swimming pool filter cartridge can capture:

  • Dirt, dust and fine suspended particles.

  • Leaves, insects and small organic debris.

  • Sunscreen, body oils and cosmetic residues.

  • Other contaminants carried into the pool by swimmers and the surrounding environment.

Cleaning removes accumulated material from the filter surface and between its pleats. Replacement involves installing a new filter element when the existing cartridge has deteriorated or can no longer provide effective filtration.

A dirty cartridge does not necessarily need replacing. In many cases, appropriate cleaning restores its filtration performance, provided the filter remains structurally sound.

Cartridge Cleaning

2. How Does a Pool Cartridge Filter Work?

A cartridge filter uses a pleated filtration element to separate suspended particles from circulating pool water.

Most cartridge filters contain three main components:

  • Pleated filter media: Usually manufactured from specialised polyester fabric, the pleats provide a large filtration surface within a compact housing.

  • End caps: These secure the cartridge structure and help create a seal that prevents unfiltered water from bypassing the filter media.

  • Central support core: A perforated internal structure supports the cartridge and helps it maintain its shape under operating pressure.

The Filtration Process

In many common cartridge filter designs, water enters the housing and passes through the outside surface of the cartridge towards its central core. Particles become trapped on the filter media while filtered water moves through the internal support structure and returns to the pool.

The pleated design increases the available filtration area, allowing the cartridge to capture suspended contaminants efficiently.

As debris accumulates between the pleats, the available filtration surface becomes restricted. This increases resistance within the filter and can affect the system's operating pressure and water flow.

3. When Should You Clean a Pool Filter Cartridge?

The filter pressure gauge is one of the most useful indicators of cartridge condition.

Establish a Clean-Filter Pressure Baseline

After installing or thoroughly cleaning a cartridge, restart the filtration system and allow it to reach normal operating conditions.

Record the pressure gauge reading once the system is fully primed and trapped air has been released. This becomes the clean-filter pressure baseline.

For accurate comparisons, maintain the same pump speed and valve configuration when taking subsequent readings.

Monitor Pressure Increases

A pressure increase of approximately 55–70 kPa (8–10 psi) above the clean starting pressure is a general reference for considering cartridge cleaning.

For example, if the normal operating pressure is 70 kPa, a reading approaching 125–140 kPa may indicate that the cartridge requires attention.

However, cleaning thresholds vary between filter models. Always prioritise the manufacturer's specified pressure limit.

Other warning signs include:

  • Reduced return flow: Water returning through the pool outlets is noticeably weaker than normal.

  • Cloudy water: Suspended particles may not be passing through the filtration system effectively, although water chemistry and sanitisation problems must also be investigated.

  • Visible contamination: Dirt or oily deposits remain between the cartridge pleats.

How Often Should You Check the Cartridge?

Cleaning frequency depends on pool usage, surrounding vegetation, dust exposure, weather conditions and the amount of debris entering the water.

Rather than relying on a fixed seasonal cleaning schedule, check the pressure gauge at least weekly and inspect the system regularly.

During the Australian swimming season, particularly after heavy pool use, storms or periods of high dust and leaf exposure, more frequent checks may be necessary.

As part of routine cartridge filter maintenance, clean the element when its condition or pressure readings indicate that attention is required. Avoid unnecessary cleaning, as repeated handling can accelerate filter wear.

4. How to Clean a Pool Filter Cartridge: Step-by-Step Guide

Pool cartridge filter cleaning should follow a consistent procedure to protect the filter media and prevent pressure-related accidents. This cartridge filter cleaning process also helps ensure the housing is correctly sealed before the filtration system returns to operation.

Step 1: Turn Off the Pool Pump and Isolate the Power

Switch off the pool pump and isolate its electrical supply to prevent automatic restarting through a timer or controller.

Never open a filter housing while the pump is operating.

Step 2: Release Trapped Pressure

Slowly open the filter's air relief valve to release trapped air and internal pressure.

Wait until the pressure gauge reads zero and the system is fully depressurised before opening the housing.

Step 3: Open the Filter Housing

Follow the manufacturer's instructions to remove the locking ring, clamp or filter lid.

Carefully lift the cartridge out of the housing without forcing or bending the filter element.

Step 4: Rinse the Filter Pleats

Use a standard garden hose with a gentle spray.

Work from the top of the cartridge downwards, directing water between the pleats to remove accumulated dirt and sediment.

Rotate the cartridge to clean all sides evenly. Avoid concentrated high-pressure streams that could damage the filter fabric.

Step 5: Remove Remaining Debris

If dirt remains lodged between the pleats, gently separate the folds by hand while rinsing.

A purpose-designed cartridge cleaning attachment may also be used if approved by the manufacturer.

Avoid hard brushes, sharp objects and aggressive scraping.

Step 6: Inspect the Cartridge

After rinsing, check the filter element for physical deterioration. Refer to Section 7 for the specific conditions that indicate replacement is necessary.

Step 7: Allow the Cartridge to Drain

Allow excess water to drain before reinstalling the cartridge. This makes lifting easier and prevents dirty runoff from contaminating the clean O-ring and sealing surfaces during reassembly.

Step 8: Reassemble the Filter Housing

Check the housing and O-ring sealing surfaces for dirt or damage.

Clean the sealing surfaces and apply a compatible lubricant to the O-ring if recommended by the manufacturer.

Reinstall the cartridge in its correct position and secure the housing according to the specified assembly procedure. Do not overtighten locking components.

Step 9: Restart and Check the System

Ensure the air relief valve is correctly positioned and restart the filtration system according to the manufacturer's instructions.

Release trapped air through the air relief valve until a steady stream of water appears, then close the valve.

Stand clear of the filter lid while purging air. Check for leaks around the housing and confirm that normal return flow has been restored.

Record the new operating pressure for future comparison.

5. Deep Cleaning: Removing Oils and Mineral Deposits

A garden hose rinse is generally sufficient for loose dirt and ordinary debris. However, certain deposits require additional treatment because they adhere more firmly to the filter media.

Oil and Grease Deposits

Oily residues can form deposits on cartridge surfaces and may not be removed completely by ordinary rinsing.

A purpose-made cartridge filter degreasing cleaner can help loosen these deposits.

Follow the product instructions for dilution, soaking and rinsing. Some Australian filter manufacturers recommend periodic overnight soaking with a suitable cartridge cleaning compound in their owner's manuals, though this remains a model-specific recommendation rather than a universal 12–24-hour requirement.

Mineral Scale Deposits

Mineral scale, particularly calcium deposits, can accumulate on filter media when water conditions favour scale formation.

Acid cleaning may sometimes be appropriate for confirmed mineral deposits, but it should not be part of routine cartridge maintenance.

Before considering acid treatment:

  1. Confirm that the deposit is mineral scale rather than oil or organic contamination.

  2. Remove oily residues first using an appropriate cleaning method.

  3. Check whether the cartridge manufacturer permits acid treatment.

  4. Follow the specified chemical handling and rinsing instructions.

Never mix acid with other cleaning chemicals. Avoid household detergents, dishwashing liquids and unapproved solvents, which may leave residues or damage filter components.

6. Common Cartridge Cleaning Mistakes

Incorrect cleaning practices can reduce filtration performance and shorten cartridge service life.

Common Mistake Why It Causes Problems
Using a pressure washer Excessive pressure can tear or weaken the filter fabric.
Scrubbing pleats with hard brushes Abrasion can damage the filtration surface.
Using unsuitable chemicals Unapproved products may deteriorate filter materials or leave residues.
Reinstalling a damaged cartridge Compromised filter media may allow unfiltered water to pass through.
Failing to release trapped air Air remaining in the housing can create pressure-related safety risks.
Ignoring pressure readings Developing filtration restrictions may go unnoticed.
Cleaning too frequently Excessive handling and chemical exposure can accelerate wear.
Waiting until severely blocked Heavy contamination makes cleaning more difficult and disrupts normal operation.

Following a condition-based maintenance approach is more reliable than cleaning the cartridge unnecessarily or waiting until filtration performance has deteriorated significantly.

7. When Should a Pool Filter Cartridge Be Replaced?

Cleaning removes accumulated contaminants, but it cannot restore a cartridge that has suffered permanent structural damage.

Replacement is necessary when the filter element can no longer maintain effective filtration after appropriate cleaning.

Look for the following conditions:

  • Torn or frayed pleats: Damaged filter fabric can allow fine particles to pass through the filtration system.

  • Cracked or deformed end caps: Damaged end caps may prevent proper sealing and allow water to bypass the filter media.

  • Damaged central support core: A weakened internal structure may no longer support the cartridge under normal operating pressure.

  • Persistent filtration problems: Poor water clarity or ineffective particle removal continues despite correct cleaning and suitable water chemistry.

  • Abnormal operating pressure: Pressure remains elevated or returns to an unusually high level shortly after cleaning, even after other possible system restrictions have been investigated.

Cartridge lifespan varies with material quality, pool usage, water conditions, maintenance practices and manufacturer specifications. There is no universal replacement interval suitable for every pool.

Follow the manufacturer's estimated service life and replace the cartridge when its condition or filtration performance indicates that it has reached the end of its useful service life.

Pro Tip: Cartridge Cleaning and Pool Water Quality

Cartridge filtration removes suspended particles from pool water, but it does not disinfect the water or maintain chemical balance.

Even with a clean filter, Australian pool owners must continue monitoring chlorine levels, pH and other relevant water chemistry parameters. Appropriate sanitisation and balanced water conditions remain essential for controlling microorganisms and maintaining suitable swimming conditions.

Conclusion

Correct cartridge cleaning helps maintain effective swimming pool filtration, consistent water circulation and reliable equipment operation. As part of regular pool filter maintenance, monitoring pressure readings, using appropriate cleaning methods and replacing deteriorated filter elements when necessary can help protect filtration equipment and maintain long-term performance.