Pool Filter Maintenance
Learn how to maintain sand, recycled glass, cartridge and DE pool filters. This guide covers practical cleaning procedures, pressure monitoring, cartridge chemical treatments, common equipment faults and Australian backwash water disposal requirements.
A swimming pool filter removes suspended dirt, fine debris, oils and other particles as water passes through the filtration system. Its performance depends on the condition of the filter media, the amount of debris entering the system and how well the equipment is maintained.
Australian residential pools generally use sand, cartridge or diatomaceous earth (DE) filtration. Each system captures particles differently, so the cleaning method and maintenance requirements are not interchangeable.
Filtration also performs a different role from sanitisation. A filter physically removes suspended material, while chlorine and other sanitisers control microorganisms. Poor filtration can contribute to cloudy water and reduced circulation, but cleaning the filter alone will not correct every water quality problem.

Understanding the Main Types of Pool Filters
Sand Filters
Sand filters pass water through a bed of graded filter media. Traditional pool-grade silica sand traps particles between the grains as water moves through the tank.
Over time, accumulated dirt increases resistance to water flow. Backwashing reverses the flow through the filter bed, lifting the media and flushing trapped debris through the waste outlet.
Many Australian homeowners are also choosing recycled glass filter media as an alternative to conventional sand.
Silica Sand vs Recycled Glass Media
Recycled glass media is manufactured from processed glass and is designed for use in compatible media filters. Waterco, for example, markets its glass media as a lower-biofouling alternative with a more consistent particle structure and reduced initial backwashing requirements.
The two materials have different characteristics:
| Feature | Silica Sand | Recycled Glass Media |
|---|---|---|
| Material | Graded pool filter sand | Processed recycled glass |
| Initial cost | Generally lower | Generally higher |
| Filtration | Established depth filtration | Depth filtration with product-dependent performance |
| Maintenance | Periodic backwashing | Still requires periodic backwashing |
| Media condition | Can compact or develop deposits over time | Product-dependent resistance to degradation and biofouling |
| Replacement | Depends on condition and manufacturer guidance | Depends on condition and manufacturer guidance |
Glass media is not automatically a better choice for every pool. Sydney Water's industry guidance notes that independent comparative evidence has historically been limited, despite manufacturers reporting several potential advantages.
When replacing sand with glass, check the filter manufacturer's compatibility requirements. Glass and sand can have different bulk densities and filling quantities, so the replacement amount should not simply be copied from the original sand specification.
Cartridge Filters
Cartridge filters use pleated synthetic fabric elements to capture suspended particles. The pleats provide a large filtration surface without requiring a large filter tank.
As oils, sunscreen, dust and other contaminants accumulate between the pleats, water flow becomes restricted. The cartridge must then be removed and cleaned.
Cartridge filters are not normally cleaned through backwashing. Their maintenance relies on rinsing, chemical cleaning when necessary and replacing damaged elements.
Diatomaceous Earth (DE) Filters
DE filters use fine powder made from fossilised aquatic organisms. The powder coats internal grids or elements, forming a filtration layer called a filter cake.
This coating captures fine suspended particles as water passes through the filter.
Backwashing or manual cleaning removes the accumulated DE and debris. Fresh DE powder must then be added in the quantity specified for the particular filter.
DE handling requires particular care. Some processed DE products can contain crystalline silica, making airborne dust a respiratory hazard. Follow the product safety data sheet and use appropriate respiratory and eye protection.
Australian Pool Filter Equipment Brands
Australian pool equipment suppliers commonly stock filtration products and replacement components from AstralPool, Waterco, Zodiac, Davey, Onga/Pentair and Hayward.
These manufacturers use different tank designs, cartridge dimensions, multiport valves and replacement components. Always identify the exact filter model before purchasing a cartridge, spider gasket or replacement media.
How to Maintain a Sand Filter
Sand filter maintenance mainly involves monitoring operating pressure, backwashing when required and checking the internal components when filtration performance deteriorates.
When Should You Backwash?
Record the pressure gauge reading when the filter is clean and operating normally. This is the clean-filter baseline.
For example, the Davey CrystalClear ER Series manual specifies backwashing when pressure rises approximately 50 kPa above the initial reading. Waterco's commercial filter guidance uses a differential of approximately 50–70 kPa.
These figures are manufacturer-specific examples, not universal settings for every residential filter.
A variable-speed pump adds another consideration. Pressure should be compared at the same pump speed and valve configuration used when recording the baseline. Otherwise, a change in pump speed may be mistaken for a dirty filter.
Sand Filter Backwashing Procedure
-
Switch off the pump completely.
-
Move the multiport valve to BACKWASH.
-
Restart the pump and allow water to discharge through the waste line.
-
Watch the sight glass, if fitted. Continue until the discharged water becomes clear.
-
Switch off the pump before moving the valve.
-
Select RINSE where available and run the cycle according to the manufacturer's instructions.
-
Switch off the pump and return the valve to FILTER.
-
Restart the system and check the pressure and return flow.
Some residential filter manuals specify approximately two to three minutes for backwashing, with rinse cycles ranging from around 10 to 60 seconds depending on the model. Water clarity and the manufacturer's instructions should determine when the cycle ends, rather than relying on a fixed timer.
Backwashing too frequently wastes water. Leaving a filter clogged for too long can compact the media and contribute to channeling, where water follows preferential paths through the filter bed rather than passing evenly through it.
Inspecting the Multiport Valve and Spider Gasket
A problem sometimes overlooked during routine maintenance is a deteriorating multiport valve spider gasket.
The spider gasket sits inside the multiport valve and separates its internal water passages. When it becomes worn, displaced or damaged, water may leak between valve positions.
Look for these symptoms:
-
Water continues flowing from the backwash waste line while the valve is set to FILTER.
-
The valve handle becomes unusually difficult to operate.
-
The valve does not seal properly after changing positions.
-
Water bypasses the intended filtration route.
A damaged spider gasket can cause continuous water loss and allow inadequately filtered water to return to the pool.
Do not force a stiff valve handle. Debris lodged inside the valve can damage the gasket further. A pool technician can inspect the valve, rotor and gasket and replace the affected components.
When Should Sand or Glass Media Be Replaced?
Repeated backwashing will not restore media that has become badly compacted, contaminated or physically deteriorated.
Other warning signs include:
-
Persistent channeling despite correct backwashing.
-
Filter media appearing in the pool return jets.
-
Damaged internal laterals or under-drain components.
-
Filtration performance remaining poor after cleaning.
Sand and glass media should be inspected before replacement. The filter tank may need to be opened by a technician to check the media bed and internal components.
How to Maintain a Cartridge Filter
Cartridge cleaning requires more attention to the condition of the pleated material than simply removing visible dirt.
Cartridge Cleaning Procedure
-
Switch off and isolate the pool pump.
-
Open the air relief valve and allow trapped pressure to fall completely.
-
Open the filter housing according to the manufacturer's instructions.
-
Remove the cartridge carefully.
-
Rinse the element from top to bottom using a garden hose.
-
Direct water between the pleats at an angle to remove trapped dirt.
-
Inspect the pleats, end caps, seams and central support structure.
-
Allow the excess water to drain and reinstall the cartridge correctly.
-
Check the housing seal and O-ring before securing the lid.
-
Restart the system and check for leaks and abnormal pressure.
Avoid using a high-pressure washer. Excessive pressure can distort the pleats and damage the filtration material.
Deep Cleaning: Remove Oils Before Mineral Deposits
Normal rinsing removes loose debris but may not remove accumulated sunscreen, body oils, cosmetics and grease.
A specialised cartridge degreaser breaks down these organic deposits. A chemical soak may be necessary when ordinary rinsing no longer restores the cartridge.
Waterco's AquaPure Filter Cleaner and Degreaser provides one practical example of a product-specific dilution: one litre of cleaner to 50 litres of water, with a minimum soaking period of 30 minutes for cartridge elements. The cartridge must then be thoroughly rinsed before reinstallation.
Mineral deposits require a different treatment.
Calcium scale and other mineral residues may need a manufacturer-approved mild acid cleaner. However, acid should never be the first treatment for a greasy cartridge.
The correct sequence is:
-
Rinse away loose debris.
-
Degrease the cartridge to remove oils and organic contamination.
-
Rinse thoroughly to remove the cleaning solution.
-
Assess whether mineral deposits remain.
-
Use an approved descaling treatment only if the cartridge manufacturer permits it.
-
Rinse thoroughly before returning the cartridge to service.
Applying acid before removing oils can cause organic deposits to become embedded in the filter fibres. This may permanently restrict water flow and shorten cartridge life.
Never mix acid with chlorine or other cleaning chemicals. Follow the product safety instructions and avoid using a homemade chemical concentration without manufacturer approval.
Replace the cartridge if its pleats are torn, the end caps are cracked or the material remains restricted after appropriate cleaning.
How to Maintain a DE Filter
DE filter maintenance involves cleaning the internal grids and restoring the correct powder coating.
When pressure rises or water flow decreases, check whether the filter requires backwashing or manual cleaning.
For filters that require manual servicing:
-
Switch off and isolate the pump.
-
Release all trapped pressure.
-
Open the filter housing according to the manufacturer's procedure.
-
Remove the grids or filter elements.
-
Rinse away accumulated debris and old DE powder.
-
Inspect the fabric, seams and support structures for damage.
-
Reassemble the filter correctly.
-
Add fresh DE powder in the specified quantity and method.
The amount of DE required depends on the filter's design and filtration area. Too little powder leaves parts of the grid inadequately coated. Excessive powder can increase resistance and interfere with operation.
Some systems require DE to be mixed into a slurry before being introduced through the skimmer. Others use a different charging procedure. Follow the relevant manual rather than assuming all DE filters work identically.
How Often Should a Pool Filter Be Cleaned?
Pool filter cleaning frequency depends on operating conditions rather than a universal calendar schedule.
The following table provides a practical maintenance framework.
| Maintenance Activity | Suggested Frequency or Trigger |
|---|---|
| Check filter pressure | Weekly and during routine inspections |
| Observe return water flow | During normal operation |
| Inspect skimmer and pump baskets | Weekly or more often during heavy debris periods |
| Backwash sand filters | When pressure or flow indicates cleaning is needed |
| Rinse cartridge elements | When pressure rises or flow declines |
| Deep-clean cartridges | When oils or mineral deposits remain after rinsing |
| Clean and recharge DE filters | According to filter pressure and manufacturer instructions |
| Inspect seals and valves | During periodic servicing |
| Inspect filter media and internal components | When performance problems persist |
Pool usage, swimmer numbers, nearby trees, pollen, dust and seasonal weather all influence how quickly a filter collects debris.
A pool exposed to bushfire ash or heavy airborne dust may need more frequent inspection than a sheltered backyard pool.
Cleaning too often is not necessarily beneficial. Cartridge elements, in particular, can lose some filtration effectiveness if repeatedly cleaned without sufficient reason.
Understanding Pool Filter Pressure
A filter pressure gauge measures operating pressure within the filtration system. Its most useful function is showing how resistance changes as debris accumulates.
The clean-filter baseline should be recorded after the system has been cleaned and returned to normal operation.
High Filter Pressure
High pressure generally indicates increased resistance.
Possible causes include:
-
Accumulated dirt inside the filter.
-
Restricted return lines.
-
Partially closed valves.
-
Compacted or scaled filter media.
-
Blocked cartridge pleats.
If pressure remains high after cleaning, inspect the return plumbing and internal filter components.
Low Filter Pressure
Low pressure may indicate inadequate water supply or a pump-related problem.
Check:
-
Pool water level.
-
Skimmer and pump baskets.
-
Air entering the suction-side plumbing.
-
Pump priming and impeller condition.
-
Valve positions and suction restrictions.
Unstable Pressure
Fluctuating pressure can result from air entering the system, inconsistent water supply or pump suction problems.
Check for air bubbles in the pump lid or return outlets and observe whether the pressure changes with pump speed.
A faulty gauge can also produce misleading readings. Replace it if the needle sticks, fails to return to zero when depressurised or gives inconsistent readings.
Signs That a Pool Filter Needs Maintenance
| Symptom | Possible Cause | Recommended Action |
|---|---|---|
| Cloudy water | Poor filtration, inadequate sanitisation or chemical imbalance | Check water chemistry and filter performance |
| Reduced return flow | Restricted filter or pump suction | Inspect filter and baskets |
| Rapid pressure increase | Heavy debris accumulation | Check whether cleaning is required |
| Sand or media in the pool | Damaged laterals or incorrect media | Inspect internal components |
| Water leaking from the waste line | Worn spider gasket or valve problem | Inspect the multiport valve |
| Frequent filter cleaning | Heavy debris, incorrect sizing or media problems | Investigate the underlying cause |
Cloudy water does not automatically mean the filter needs cleaning. Inadequate chlorine, incorrect pH, algae and poor circulation can produce similar symptoms.
Pool Filter Maintenance and Australian Conditions
Australian pool owners face different maintenance challenges depending on their location.
Hot weather and heavy swimming activity can increase the amount of sunscreen, body oils and fine debris entering the water. Wind, pollen, leaves and bushfire ash can also increase filter loading.
During these periods, check pressure and return flow more frequently. Remove larger debris before it reaches the filtration system and keep pump baskets clear.
Where Should Pool Filter Backwash Water Be Discharged?
Backwash wastewater contains concentrated dirt, organic material, treatment chemicals and sometimes DE powder. It should not be discharged directly into a stormwater drain without checking the applicable local requirements.
The correct disposal method varies across Australia.
New South Wales – Sydney Water
Sydney Water requires chlorinated pool and spa drainage to be directed to the wastewater system rather than stormwater. Approved backwash connections have specific requirements, including a maximum flow rate of 2 litres per second and a compliant overflow gully connection under AS/NZS 3500.
Tweed Shire Council also requires sand filter backwash and cartridge cleaning wastewater to be discharged to sewer, while ordinary pool overflow is directed to stormwater.
Victoria – Mornington Peninsula Shire
Mornington Peninsula Shire provides several permitted disposal pathways, including subsurface soakage, approved sewer connections and treated discharge to the stormwater network.
Stormwater discharge is subject to treatment requirements, including total residual chlorine below 0.1 mg/L and suspended solids below 10 mg/L. Plumbing work must be completed by a registered plumber with the required compliance documentation.
Western Australia – Perth and Regional Areas
Western Australia's requirements differ from those in Sydney and parts of Victoria.
Water Corporation does not accept domestic swimming pool backwash or drainage as trade waste for discharge to sewer. Homeowners should contact their Local Government Authority for acceptable disposal options.
WA government guidance identifies suitable irrigation as one possible disposal method, provided the water quality is appropriate. It also advises against discharging pool wastewater into road drains, waterways or onsite sewage systems.
DE filter wastewater requires particular attention. For commercial aquatic facilities, Water Corporation requires DE-containing wastewater to pass through a settleable solids arrestor before sewer discharge is considered.
These examples are not interchangeable rules. Check the relevant Council, water service provider and plumbing requirements before installing or using a backwash discharge connection. Unauthorised discharge that harms people or the environment can also lead to enforcement action.
Common Pool Filter Maintenance Mistakes
Several mistakes can shorten filter life or cause avoidable equipment problems.
-
Backwashing too frequently: This wastes water and may disturb the filter media.
-
Using the wrong cleaning chemicals: Household detergents and unsuitable acids can damage filter materials.
-
Acid-cleaning greasy cartridges: Oils should be removed before any approved mineral descaling treatment.
-
Forcing a stiff multiport valve: Debris or internal wear can damage the spider gasket.
-
Ignoring media in return outlets: Sand entering the pool may indicate damaged laterals or incorrect media.
-
Adding incorrect DE quantities: The filter requires a specific powder charge.
-
Replacing media without inspection: Persistent pressure problems may originate from damaged internal components rather than worn media.
Always switch off the pump before changing multiport valve settings or opening filter equipment.
Pool Filter Maintenance Checklist
Routine Checks
- Record filter pressure against the clean-filter baseline.
- Observe return water flow.
- Inspect skimmer and pump baskets.
- Check for visible leaks.
- Listen for unusual pump noises.
Periodic Maintenance
- Backwash sand filters when required.
- Clean cartridge elements when required.
- Clean and recharge DE filters according to specifications.
- Inspect multiport valve seals and connections.
- Check the pressure gauge for accurate readings.
Long-Term Inspection
- Assess sand or glass media condition.
- Inspect cartridge pleats and end caps.
- Check DE grids for damage.
- Inspect internal laterals and valve components.
- Replace worn seals, cartridges or media when necessary.
When to Seek Professional Pool Filter Servicing
Routine cleaning is generally suitable for pool owners who understand their equipment and follow the manufacturer's instructions.
Professional servicing is appropriate when:
-
Filter pressure remains high after cleaning.
-
Water continues leaking from the multiport valve or waste line.
-
Sand or DE powder repeatedly enters the pool.
-
Internal grids, laterals or filter elements are damaged.
-
The filter requires unusually frequent cleaning.
-
The pressure gauge gives inconsistent readings.
Before purchasing replacement components, identify the filter model and check the part number. Cartridge dimensions, media grades, DE quantities and spider gasket designs are not universal.
If a filter continues to perform poorly, a technician should check the entire filtration system rather than automatically replacing the media.
For further troubleshooting, see our related Pool Pump Maintenance, Water Balance and Water Quality Monitoring guides.
Need replacement components? Check compatible filter cartridges, recycled glass media, O-rings and multiport valve seals through your equipment manufacturer or pool equipment supplier.