Robotic Pool Cleaner Guide for Australia: Types, Setup, Maintenance & Safety

By iGardenOfficialAU

Published: December 26, 2025

Updated: December 30, 2025

Robotic Pool Cleaner Guide for Australia: Types, Setup, Maintenance & Safety

Keeping your swimming pool clean can be a big task, especially in Australia where sunny weather and backyard pools are common. Dust, leaves, insects, and other debris can make a pool dirty very quickly. Fortunately, robotic pool cleaners make this job much easier. So as the robotic pool cleaners expert, we want to explain everything about using a robotic pool cleaner in Australia, including types, setup, operation, maintenance, safety, and troubleshooting—all in simple and clear language. Helping you use robotic pool cleaners more effectively.

1. Why Use a Robotic Pool Cleaner?

A robotic pool cleaner is a smart device that moves around your pool automatically, cleaning the floor, walls, and sometimes the waterline. Unlike traditional pool cleaners, it has its own motor, sensors, and filter system, so it don’t rely on your pool pump.

Benefits of Robotic Pool Cleaners

Benefit	Explanation
Time-saving	Cleans automatically without manual scrubbing
Thorough cleaning	Can clean walls, corners, and steps better than suction cleaners
Energy-efficient	Uses less electricity than running a pool pump for hours
Easy maintenance	Cleaning the filter is simpler than cleaning the entire pool manually

2. Types of Robotic Pool Cleaners

Choosing the right type of robotic cleaner is important. Different types robotico pool cleaners are suitable for different pool sizes and shapes. Their Pros and Cons in chart as follows:

Type	Description	Pros	Cons
Corded Robotic Cleaner	Connects to a power outlet, has its own motor	Powerful, works for large pools, long runtime	Cord can get tangled, needs nearby outlet
Cordless Robotic Cleaner	Runs on rechargeable battery	Easy to move, no cord issues	Limited runtime, less powerful

3.How to Use Robotic Pool Cleaner

①Preparing Your Pool

Proper preparation ensures the pool cleaner works efficiently. So what steps you should you take?

Step	What to Do	Why
Remove debris	Take out leaves, branches, and toys	Prevents cleaner from getting stuck
Check water level	Ensure water is above skimmer	Cleaner needs full submersion
Turn off pump	If cleaner doesn’t use pump	Saves electricity
Check pool hazards	Remove sharp objects	Prevents damage to cleaner

②Setting Up the Robotic Pool Cleaner

Follow the steps as follow to get your robotic pool cleaner ready.

Step	How to Do It	Notes
Unpack cleaner	Check all parts: body, power supply, filter, remote	Make sure nothing is missing
Connect power	Plug in corded cleaner or charge cordless	Keep cords away from water
Place in water	Lower gently into pool	Avoid dropping to prevent damage
Select cleaning mode	Choose floor-only, walls, or waterline	Depends on your pool type

③Start Cleaning

Using a robotic cleaner is simple but requires some monitoring. Even automatic pool cleaners may get stuck in corners, so check it periodically.

Operation Step	Details	Tips
Turn on	Use control panel or remote	Make sure power supply is safe
Automatic cleaning	Sensors guide the cleaner around pool	Check it occasionally for obstacles
Cleaning time	Usually 2–4 hours	Larger pools may need longer
Remote control	Available on some models	Can target specific spots

④After Cleaning: Removing and Maintaining

Proper maintenance increases the cleaner’s lifespan.

Task	How to Do It	Notes
Remove cleaner	Turn off power, lift by handle	Do not pull cord
Empty filter	Remove debris basket and rinse	Prevents clogging
Rinse cleaner	Use fresh water	Removes chemicals and dirt
Store	Dry, shaded area	Avoid sun exposure
Inspect parts	Check brushes, wheels, and cords	Replace worn parts

4. General Robotic Pool Cleaners Problems and Solutions

Even robotic cleaners can have issues. Here’s a check table:

Problem	Possible Reasons	Solution
Charging Failure	Debris on charging head	Clean debris
Charging Failure	Damaged charging kit	Replace charging kit
Startup Failure	Water on panel or hands	Wipe dry and retry
	Operational error	Restart
	Dead battery / Low battery	Fully charge
No Movement/Pump	Out of water	Submerge fully
No Movement/Pump	Power button not pressed	Tap ON/OFF after setup
Not Working	Full filter basket	Clean the basket
Not Working	Impeller stuck	Clear debris in OFF state
Moving but Not Pumping	Full filter basket	Clean basket
	Water inlet clogged	Remove and clean inlet
	Low battery	Fully charge
Pumping but Not Moving	Obstacle entrapment	Remove obstacle and restart
Pumping but Not Moving	Worn track/deviation	Roll or replace track
Not Climbing	Impeller stuck	Clear debris
	Full filter basket	Clean basket
	Water inlet clogged	Clean inlet
	Low battery	Fully charge
Poor Cleaning	Worn filter/brush	Replace filter/brush
Poor Cleaning	Inlet clogged	Clean inlet

5. Safety Tips

Category	Safety Tip	Explanation
Electric Safety	Unplug first	Always unplug corded cleaners before taking them out of the pool
	Keep cords away from water	Make sure cords don’t touch water or sharp objects
	Use RCD/GFCI	Use a safety switch on outdoor outlets to prevent electric shock
	Check the cord	Don’t use if the cord or plug is damaged
Handling & Placement	Put in gently	Lower the cleaner into the pool carefully, don’t drop it
	Lift by handle	Never pull it by the cord
	Avoid hot surfaces	Don’t leave the cleaner on hot surfaces or in direct sunlight for too long
Chemicals & Water	Keep water balanced	Very high or low chlorine or pH can damage the cleaner
	Rinse with fresh water	Wash off chemicals after use to protect parts
	Keep kids and pets away	Don’t let children or pets play with the cleaner while it’s running
Operation Safety	Stay away from swimmers	Keep the cleaner away from people in the pool
	Use only complete parts	Don’t use if brushes, wheels, or covers are broken or missing
	Check regularly	Look at brushes, wheels, and other parts to make sure they’re not worn out
Storage Safety	Store in shade and dry	Keep it out of sun, rain, and frost
	Keep out of reach of kids	Store somewhere kids can’t reach
	Organise accessories	Keep parts neat to avoid tripping or damage

6. Conclusion

Robotic pool cleaners are an excellent choice for Australian pools. They save time, energy, and effort while keeping your pool clean. By choosing the right type, preparing the pool properly, operating it correctly, and performing regular maintenance, you can enjoy a sparkling pool all year round.

With proper use and attention to safety, a robotic pool cleaner can last for many years, making swimming more enjoyable for everyone in your household.

iGarden Expert Team

Here at iGarden, we're more than just a company—we're a team of passionate pool lovers, just like you. We believe owning a pool should be all about relaxation and fun, not endless chores. That's why we pour our energy into creating helpful guides and innovative products designed to give you a sparkling clean pool with minimal effort, so you can spend less time cleaning and more time swimming.