Turning a Small Australian Pool into an Endless Swimming Pool

1. High Technology Reshaping Small Pools

In many Australian homes, backyard pools are used for relaxation and cooling off. However, they are often too small for effective lap swimming. Most residential pools are only 6–10 meters long, so swimmers must stop, turn, and push off the wall every few strokes. This makes it hard to maintain rhythm and build endurance.

Many people only realise this when they try to use their pool for fitness. What seems like enough space quickly feels limiting, and the workout becomes stop-and-go instead of continuous swimming. A simple solution is a swim jet system. It creates a steady current, allowing swimmers to stay in one place and turn a small pool into an endless swimming environment.

2.What Is an Endless Swimming Pool?

An endless pool is not necessarily a special type of pool. Instead, it is a system that creates a strong current, allowing swimmers to remain in place while swimming continuously.

The concept works like a treadmill for swimming:

• Water flows toward the swimmer.
• The swimmer swims against the current.
• Speed and resistance can be adjusted.

As long as the swimmer keeps pace with the current, they stay in the same position. This means even a small pool can provide unlimited swimming distance.

Swim jets are the technology that makes this possible.

3.How Swim Jets Transform Small Pools into an Endless Swimming Pool

Swim jets transform how a small pool is used by generating a consistent, controlled current. Instead of swimming from one end to the other, the swimmer stays in one place and swims against the current.

In a traditional pool, if the pool is too small, swimmers have to stop, turn, and push off the wall every few strokes. This can break rhythm and make training less effective. With a swim jet, the movement becomes continuous. Swimmers can keep a steady pace, maintain better breathing patterns, and focus more on their stroke technique.

For example, the iGarden Swim Jet P Series can produce strong and adjustable water flow. It can reach speeds of up to 4 m/s and flow rates up to 240 m³/h. This creates enough resistance for different types of training, from easy swimming to more intense workouts. Another important point is that the water flow is designed to be more even, not just a narrow stream. This helps swimmers stay balanced in the water and makes the experience feel closer to swimming in open water.

Because there is no need to turn at the wall, swim jets make it easier to train for longer periods without interruption. This is especially useful for people who want to use a small backyard pool for regular fitness or endurance training.

4.Key Features That Enable Endless Swimming

①Adjustable Current Strength

Different swimmers need different levels of resistance. Beginners may prefer gentle currents, while experienced swimmers want strong resistance.

The system offers multiple swimming modes, allowing users to adjust the current intensity for relaxation, training, or high-intensity exercise.

This flexibility means the same pool can serve:

• casual swimmers
• fitness enthusiasts
• competitive athletes

②Wide Flow Area

Older swim jet systems often produced a narrow stream of water, forcing swimmers to stay perfectly aligned.

Newer designs use fan-shaped currents, creating a wider swimming zone. This allows swimmers to move naturally without constantly correcting their position.

According to product specifications, this design can create a wave area up to twice as wide as traditional swim jets, improving comfort and usability.

A wider current also makes the experience easier for beginners. Small movements to the left or right will not immediately push the swimmer out of the current. This allows swimmers to relax and focus more on their stroke technique rather than constantly adjusting their position.

③Quiet and Efficient Motors

Noise is an important concern in residential environments.

Advanced swim jets use inverter-driven motors, which adjust power smoothly while keeping noise levels low. Stainless steel waterproof motors also improve durability in chlorinated or saltwater pools.

This allows swimmers to train early in the morning or late in the evening without disturbing neighbors.

④Smart Control Options

Today swim jets can be controlled in multiple ways:

• touchscreen control panels
• Bluetooth remote controls
• mobile apps

These options allow swimmers to adjust the current without leaving the pool, making workouts easier and more enjoyable. 

5.How to Install Swim Jets for Your Pool

In reality, many swim jets can be installed directly into existing in-ground pools.

For example, the iGarden Swim Jet P Series can be installed through deck drilling or built-in installation, depending on the pool structure.

In many cases:

• no pool rebuilding is required
• installation can take only a few hours
• the system integrates with existing pool structures

How to install iGarden Swim Jet P Series？Please check the video about how to install: 

iGarden Swim Jet P Series | Unboxing

iGarden Swim Jet P Series | Poolside Installation

iGarden Swim Jet P Series | Control Box Installation

6.Choosing the Right Swim Jet Models

Different swimmers need different levels of water resistance. Systems like the P Series provide multiple models designed for different swimming levels:

Higher flow rates create stronger currents, making workouts more challenging and realistic.

iGarden Swim Jet P Series

The Time Best Inventions of 2025. The stainless-steel system uses full-inverter technology for quiet, variable power and a patented flow-channel design that creates wider, consistent currents of up to 1,100 gallons per minute.

Buy Now

7. The Portable Option: iGarden Swim Jet X Series

Not every pool owner wants to modify their pool structure. Some homeowners rent their property, own an above-ground pool, or simply prefer a solution that requires little to no installation work.

For these situations, the iGarden Swim Jet X Series offers a different approach.

Unlike traditional built-in swim jets, the iGarden Swim Jet  X Series is a portable, battery-powered swim jet that attaches directly to the pool edge. It does not require plumbing modifications, wall penetration, or electrical wiring inside the pool structure.

Key advantages include:

• No permanent pool modifications required
• Compatible with many above-ground and in-ground pools
  
• Up to 10 hours of runtime per charge
• Easy setup and removal when needed
• Suitable for rental homes or temporary installations

The X Series is particularly useful for homeowners who want to experience endless swimming without committing to a permanent installation. Users can simply mount the unit on the pool edge, adjust the current level, and begin swimming. Because it operates on a low-voltage battery system, the X Series also provides additional installation flexibility where access to electrical infrastructure may be limited. For families, fitness swimmers, and pool owners looking for a portable solution, the iGarden Swim Jet X Series makes endless swimming more accessible than ever. It brings many of the benefits of a traditional swim jet system while eliminating much of the complexity associated with permanent installations.

Who Should Choose the X Series? The X Series is a good option for:

• Rental property owners
• Homeowners who do not want to drill into their pool
• Users seeking a portable swim training solution
• Families looking for fitness and recreation without major renovations

iGarden Portable Swim Jet X

Best-in-Class Water Flow: AI Inverter Tech delivers the strongest water flow in its class. 1-Min Setup: No drilling, no renovation. Clamp the jet and go. All in One: Training, playing, relaxing, experience the freedom of unlimited swimming.

Buy Now

8.A Smarter Way to Upgrade Your Pool

For many homeowners, rebuilding a pool or installing a full endless pool system is expensive and complicated.

Swim jets offer a simpler alternative.

With the right system, a small backyard pool can become:

• a personal fitness pool
• a training environment for swimmers
• a family entertainment space

Instead of changing the size of the pool, swim jets change the way the water moves, creating an entirely new swimming experience.

For many people, the biggest surprise is how different the pool feels after adding a swim jet. A pool that was once used mainly for relaxing can suddenly become a place for regular exercise and swimming practice.
A small pool does not have to limit your swimming. With swim jet technology, homeowners can transform an ordinary backyard pool into an endless swimming environment for fitness, relaxation, and family fun.

FAQs

Q1. Can I install the iGarden Swim Jet P without drilling into the pool coping or wall?

Yes. The iGarden Swim Jet P Series supports both drilled and no-drill installation options, depending on your pool structure and personal preference.

Option 1: Standard Drilled Installation (Recommended)
a. The Swim Jet P is securely mounted to the pool coping using screws and anchors.
b. This method provides the highest stability and is recommended for long-term use and higher flow settings.
c. The unit can be removed later by unscrewing the bolts, if needed.

Option 2: No-Drill Installation (Two Available Methods)
1) Adhesive Mounting (Glue Fixation)
The mounting bracket is fixed to the pool edge using high-strength industrial adhesive.
Please note: the adhesive materials are currently shipped from mainland China, and the estimated waiting time is around 2 months.

2) Counterweight Mounting (Weight Fixation)
The Swim Jet P is stabilized by placing counterweights over 11 kg (24 lbs) on the mounting bracket. This option is fully reversible and suitable for customers who prefer a non-invasive installation.

If you’re unsure which installation method is best for your pool, please contact iGarden Customer Support and provide photos of your pool edge. Our team will help recommend the most suitable solution.

Q2. Can I Install the Swim Jet Myself, or Do I Need a Professional?

While we understand that handy homeowners may want to handle the installation themselves, we strongly advise that installations be done professionally for optimal functionality and warranty purposes. Installation entails electrical wiring (carried out by a licensed electrician), correct positioning for optimal current flow, and secure fastening against movement or vibration. Professional installers can perform this activity in about 1 hour.

Q3. Will a Swim Jet Work in My Existing Pool or Do I Need to Build a New One?

IGarden Swim Jet P Series is compatible with most types of pools, including those made of steel, aluminum, and concrete. The pool should have a minimum width of 9.84 ft (3m), a minimum length of 16.4 ft (5m), and a depth of at least 3.5 ft. For more details, we suggest you contact iGarden Support Team at support@igarden.ai.