Are Swim Jets Worth It in Australia? 2026 Cost Guide

By JohnAlexander
Published: November 17, 2026
15 min read
Are Swim Jets Worth It in Australia? 2026 Cost Guide

A backyard pool is a big investment, but not every pool is built for swimming laps. Many Australian homes have pools that are great for cooling off on a hot afternoon or keeping the kids entertained, but leave little room for uninterrupted swimming.

That is where a swim jet can make a difference.

Instead of swimming from one end of the pool to the other, you swim against a continuous current and stay roughly in the same position. It gives a relatively small pool another purpose, particularly if you want to exercise at home without building a dedicated lap pool.

But the equipment is not cheap, and it will not suit every pool or every swimmer. Before spending several thousand dollars, it is worth looking at what a swim jet actually offers, how much it costs to run and whether your pool can accommodate one.

When Is a Swim Jet Worth Buying?

For some pool owners, a swim jet fills a gap that would otherwise require a much larger pool. For others, it may add little to the way they already use their backyard.

The difference usually comes down to how often you swim and what you want to get out of your pool.

You Have a Pool That Is Too Short for Lap Swimming

A common problem with residential pools is that they are designed around the backyard, not swimming distance.

A compact plunge pool or a pool with an irregular shape may be perfectly suitable for recreation, but swimming laps in it is another matter. You spend more time turning around than swimming.

A swim jet changes that. It sends a continuous stream of water towards the swimmer, providing resistance without requiring a long swimming lane.

You can practise freestyle, breaststroke and other strokes without repeatedly reaching the pool wall. The experience will depend on the current's speed, width and stability, as well as your swimming technique.

If you enjoy swimming but do not have room for a conventional lap pool, this is one of the strongest reasons to consider a swim jet.

You Swim Regularly and Prefer Exercising at Home

Getting to a public pool is not always convenient. Between travel, lane availability and opening hours, fitting swimming into a regular routine can take more effort than expected.

A swim jet removes some of that inconvenience. You can fit in a short session before work or spend more time in the pool on weekends without leaving home.

Adjustable current settings also give you some control over the effort involved. You might start with a gentler flow for technique practice and increase the resistance as your fitness improves.

The more regularly you swim, the easier it is to justify the initial expense. If you only get into the pool a handful of times each summer, the numbers may look quite different.

You Want to Get More Use Out of a Family Pool

Not everyone in a household uses a pool in the same way.

One person may want to swim for exercise, while someone else prefers a casual swim or simply enjoys playing in the water. A swim jet adds another activity without taking up the space needed for a separate swimming facility.

Some models also offer different current modes, making it easier to adjust the water movement for different activities.

That said, a swim jet does not make a pool automatically suitable for unsupervised children's swimming. Normal pool supervision and safety requirements still apply.

When Is a Swim Jet Not Worth the Money?

There are situations where buying a swim jet is difficult to justify.

Your Pool Is Already Long Enough for Laps

If you have a long pool with enough room for comfortable lap swimming, a counter-current system may not add much.

Traditional swimming gives you natural turns, push-offs and changes of direction. Swimming against a jet is a different experience, with more emphasis on maintaining your position against the current.

Neither option is inherently better. It depends on the kind of swimming you enjoy.

If your existing pool already meets your training needs, spending the money on heating, lighting or other pool improvements may make more sense.

You Rarely Use the Pool

A swim jet can be an expensive addition if it is only used occasionally.

There is the purchase price to consider, along with charging or electricity costs, routine care and possible servicing. A portable unit also needs somewhere suitable to be stored when it is not in use.

Think about your actual swimming habits rather than how often you imagine using it. If you already swim several times a week, adding a current system could make your routine easier. If the pool is mainly used for summer entertaining, the extra functionality may not justify the cost.

Your Pool Cannot Accommodate the Equipment

Not every pool edge is suitable for every swim jet.

Curved coping, narrow paving, raised edges and built-in steps can all affect where a unit can be positioned. A fixed system has its own mounting and electrical requirements, while a portable model still needs a secure and compatible edge.

Check the manufacturer's installation specifications before choosing a model. Pool length alone is not enough to establish compatibility.

What Difference Does a Swim Jet Make?

A swim jet does more than move water around. It changes the way you can use a pool, particularly when there is not enough room for conventional swimming.

More Time Swimming, Less Time Turning

In a short pool, lap swimming can involve frequent turns and push-offs. This interrupts your stroke rhythm and makes longer sessions less practical.

With a counter-current system, you can keep swimming in roughly the same position. That gives you more time to focus on breathing, stroke technique and body position.

It is useful for general swimming practice, although it should not be treated as a complete replacement for conventional lap or open-water training. The conditions are different, and a pool current cannot reproduce every aspect of swimming in open water.

Change the Current to Suit Your Training

A current that feels comfortable to one swimmer may be too strong or too weak for another.

Adjustable settings let you change the resistance without changing equipment. A beginner might prefer a lower setting, while a more experienced swimmer may want a stronger current for conditioning.

When comparing swim jets, pay attention to more than the advertised flow rate. Water speed, current width and consistency all affect how the system feels in the pool.

A high flow rate on its own does not guarantee a comfortable swimming current. A narrow or turbulent stream can be harder to swim against than a broader, more even flow.

Keep Your Existing Pool

For many Australian homeowners, the biggest attraction is being able to improve an existing pool rather than start a new construction project.

A portable swim jet can be mounted at a suitable pool edge and removed when required. That avoids the permanent pool modifications associated with some built-in systems.

Fixed systems offer a more permanent setup, but require more planning before installation.

Either way, the aim is to get more functionality out of the pool you already own.

How Much Does a Swim Jet Cost in Australia?

Prices vary considerably depending on the type of system, its performance and how much installation work is involved.

A swimming tether, for example, is a relatively inexpensive way to add resistance to a pool. A powered counter-current system is a much bigger purchase.

The following figures are indicative Australian market estimates for budgeting purposes, rather than fixed retail quotations.

System Type Indicative Price (AUD) Installation
Basic swimming tether or resistance belt A$40–A$70 Usually minimal
More substantial stationary tether system Around A$500 Depends on mounting
Portable or over-the-wall swim jet A$3,000–A$7,000+ Generally no permanent pool modification
Fixed or built-in counter-current system A$4,000–A$15,000+ Professional installation may be required
Premium installed counter-current project A$16,000–A$30,000+ Depends on equipment and construction
Swim spa A$18,000–A$40,000 for many mid-range options; premium models can exceed A$50,000 Delivery, site preparation and electrical work may be additional

These categories are not directly comparable. Some fixed-system prices cover the equipment only, while others include installation or structural work.

For a straightforward retrofit, it is sensible to allow an additional A$1,000–A$3,000+ for electrical work and site preparation where required. More complicated installations can cost considerably more.

If you are comparing different counter-current systems, our guide to counter-current system costs in Australia covers the main cost factors in more detail.

How Much Does It Cost to Run a Swim Jet?

Running costs are worth checking before you buy, but they are not necessarily a major expense.

For a mains-powered system, the calculation is straightforward:

Power consumption (kW) × Operating hours × Electricity tariff ($/kWh) = Estimated electricity cost

Take a system drawing 1.5 kW while running. At an illustrative electricity tariff of A$0.30–A$0.38 per kWh, one hour of operation would cost around A$0.45–A$0.57.

If you swim for one hour, three times a week, that works out to approximately:

  • A$1.35–A$1.71 per week.

  • A$70–A$89 over 52 weeks.

This is a worked example, not a guaranteed running cost. Actual consumption depends on the system's rated input and operating load, while electricity tariffs vary between states, retailers and plans.

Battery-powered swim jets work differently. They draw electricity when the battery is charged rather than continuously from the mains during a swimming session. Charging costs depend on battery capacity, charging efficiency and how frequently the equipment is used.

What About Maintenance?

Pool equipment spends its life exposed to water, chemicals and sunlight. A swim jet is no exception.

Saltwater pools deserve particular attention because salt and moisture can accelerate corrosion if equipment is not properly protected.

Before purchasing, check the following:

  • Whether the motor housing and external components are suitable for poolside conditions.

  • The equipment's IP protection rating and waterproofing requirements.

  • How cables and electrical connections are protected.

  • Battery care and storage instructions, if applicable.

  • Warranty coverage and the availability of replacement parts.

  • Whether local Australian servicing and customer support are available.

A cheaper unit may not represent better value if replacement parts are difficult to obtain or servicing becomes a problem later.

Swim Jet vs Lap Pool vs Swim Spa: Which Is Better Value?

A swim jet, lap pool and swim spa can all provide a way to swim at home, but they involve very different investments.

Option What You Get What to Consider
Swim Jet A continuous current in an existing pool Pool compatibility and equipment cost
Lap Pool Conventional swimming over a fixed distance Land, construction and ongoing pool costs
Swim Spa A separate compact swimming and spa facility Higher purchase price, delivery and site preparation
Swimming Tether Resistance against a fixed point No powered or naturally moving current

If you already have a backyard pool, adding a swim jet may be considerably more practical than building another swimming facility.

A lap pool is still the better fit for someone who wants conventional swimming over measured distances. A swim spa may appeal to households that want a separate heated swimming and relaxation space.

The important distinction is whether you are upgrading an existing pool or buying an entirely new swimming facility.

Portable or Fixed Swim Jet: Which Suits Your Pool?

Once you have decided that a swim jet is worth considering, the next step is choosing the right type.

For most residential applications, the main distinction is between portable battery-powered systems and fixed mains-powered systems.

Portable Battery-Powered Swim Jets

A portable system suits homeowners who want a swimming current without permanently altering their pool.

The iGarden Swim Jet X Series is designed around this approach. It uses an edge-mounted unit with a separate battery power box, so the equipment can be positioned at the pool edge and removed when it is not needed.

For suitable pools, the standard setup does not require permanent pool modifications or drilling.

Other practical advantages include:

  • Battery-powered operation.

  • Compatibility with selected above-ground and in-ground pools.

  • A portable design for storage between sessions.

  • No permanent plumbing modifications for the standard setup.

The X Series includes different performance levels, so the choice is not simply a matter of buying the most powerful model.

Model Maximum Water Speed Maximum Flow Rate Published Runtime
X Air 2.5 m/s 179 m³/h 0.7–2.5 hours
X5 3.0 m/s 200 m³/h 1–5 hours
X PRO 10 3.5 m/s 250 m³/h 1.5–10 hours

These are published maximum performance and runtime figures. Actual battery life depends on the selected operating level. Running the unit at a stronger setting will generally reduce the time available between charges.

For homeowners with above-ground pools, existing fibreglass pools or properties where permanent modifications are not desirable, portability can be a major advantage. The pool edge must still meet the model's mounting requirements.

Fixed Mains-Powered Swim Jets

If you swim frequently and want to use the equipment for longer sessions, a fixed system may be a better fit.

The iGarden Swim Jet P Series uses a mains-powered setup with a low-voltage motor to produce a wider, fan-shaped swimming current.

Unlike a battery-powered model, it does not have a battery runtime limit during operation.

Model Maximum Flow Rate Maximum Water Speed Runtime
P160 160 m³/h 2.9 m/s Continuous
P200 200 m³/h 3.5 m/s Continuous
P240 240 m³/h 4.2 m/s Continuous

The P Series is designed for regular swimming and longer sessions. Its different models offer varying levels of current performance, allowing homeowners to choose according to their swimming needs.

However, a fixed installation needs more preparation. The pool coping, mounting position, electrical supply and location of the control equipment all need to be checked before purchase.

If you are planning to use a swim jet several times a week, the convenience of continuous mains-powered operation may justify the additional installation work.

What Australian Pool Owners Should Check Before Buying

Pool dimensions, construction and electrical arrangements can all affect which swim jet will work in your backyard.

It is worth checking these details before comparing models.

Pool Size, Water Depth and Clearance

Start by measuring the pool rather than relying on its advertised capacity.

You will need to know:

  • Internal pool length and width.

  • Water depth at the intended swimming position.

  • Available space between the swimmer and pool walls.

  • Distance from steps, ladders and shallow ledges.

  • Width and construction of the pool coping.

  • Height difference between the pool edge and water surface.

As an initial compatibility guide, the iGarden product recommendations specify the following minimum pool dimensions:

Product Recommended Pool Dimensions Installation Type
iGarden Swim Jet X Series Above 2 m × 4 m Portable edge-mounted
iGarden Swim Jet P Series Above 4 m × 8 m Fixed installation

These figures are starting points for checking compatibility, not a guarantee that every pool of those dimensions will be suitable.

For the standard P Series mounting arrangement, the published fit requirements include a flat coping area of at least 475 mm and a vertical distance of less than 200 mm between the pool edge and water surface.

A narrow coping strip, curved edge or raised waterline may rule out a standard installation even if the pool itself is large enough.

Check Your Pool Construction

Australian homes commonly have concrete, fibreglass and above-ground pools. Each presents different mounting considerations.

A concrete pool may have solid coping that suits a fixed mounting arrangement, but the available edge width and surface level still matter.

Fibreglass pools can have different coping profiles and edge structures. The mounting area needs to be assessed rather than assuming the equipment will fit because the pool is in-ground.

Above-ground pools require particular attention to the strength and shape of the top edge. A portable system is not automatically compatible with every above-ground design.

If you are unsure, check the installation guide or ask the supplier to assess your pool before ordering.

Electrical Safety Around Swimming Pools

Electrical work around a pool needs proper planning. It is not something to improvise during installation.

Australian installations must comply with applicable electrical requirements, including AS/NZS 3000 and relevant state or territory regulations.

Depending on the equipment and installation, an electrician may need to assess:

  • RCD (safety switch) protection.

  • Electrical equipment locations in relation to pool zones.

  • Equipotential bonding requirements.

  • Protection against water ingress and moisture.

  • The location of external power supplies and control equipment.

A low-voltage motor does not mean the entire system is a low-voltage appliance. Any mains-powered components still need to be installed and protected correctly.

Use a licensed electrician for electrical installation or modifications associated with pool equipment.

Keep Pool Safety in Place

Adding a swim jet does not change the need for compliant pool barriers, gates and access controls.

Requirements differ between Australian states and territories, so homeowners should check the rules that apply to their property.

Children also need active adult supervision whenever they are in or around the pool. They should not operate the equipment independently or treat the swim jet as a flotation or climbing aid.

Follow the manufacturer's instructions for starting, stopping and using the system.

Consider Water Temperature

A swim jet moves water; it does not heat it.

That matters in cooler parts of Australia, particularly if you plan to swim outside the warmer months. Pool heating and a suitable cover may help extend the swimming season, but both add to the overall cost.

Check the equipment's specified operating temperature range as well. Battery performance and electronic equipment operation can be affected by temperature, depending on the model.

So, Are Swim Jets Worth It?

For an Australian homeowner with an existing pool that is too short for laps, a swim jet can be a worthwhile upgrade.

It gives regular swimmers a way to train at home without building a separate lap pool. It can also make a compact backyard pool more useful throughout the week, rather than leaving it mainly for occasional recreation.

The choice between portable and fixed equipment comes down to how you plan to use it. The X Series is worth considering if you want battery-powered operation and the flexibility to remove the unit. The P Series is more suited to homeowners who prefer a fixed setup and longer swimming sessions without battery limitations.

But if you rarely swim, already have a suitable lap pool or cannot accommodate the installation requirements, the extra expense may be hard to justify.

Before buying, measure your pool, think about how often you will use the equipment and compare the full cost rather than the advertised purchase price alone.

The best swim jet is not necessarily the one with the highest flow rate. It is the one that fits your pool, suits your swimming ability and gets used regularly.

Check Whether Your Pool Is Suitable for a Swim Jet

Not sure whether your pool coping or available swimming space will work?

Send the iGarden team a few photos of your pool, including the edge, coping and waterline. They can review the setup and help identify potential mounting or compatibility issues before you purchase.

Contact iGarden Support to discuss your pool and the right swim jet option.