If your freestyle feels comfortable at first but becomes untidy after a few minutes, the problem may not be a lack of fitness. You might be lifting your head to breathe, losing your body position or shortening your stroke as you tire.
These habits can be difficult to work on in a short pool, where you may reach the wall every few strokes. A swim machine changes that training environment. By swimming against a continuous current, you can repeat a movement without frequent turns interrupting your rhythm.
The equipment will not correct your stroke automatically. What matters is whether you can identify a problem, make a specific adjustment and repeat the movement without introducing another fault. For home swimmers, particularly those using a compact backyard pool, a counter-current swim machine offers a practical setting for this kind of work.
Why a Continuous Current Can Help With Technique
When you swim conventional laps, your attention shifts between stroke mechanics, pacing, turns and the approach to the wall. In a short pool, those interruptions happen frequently.
Swimming against a current removes much of that stop-start pattern. You can spend more time concentrating on a single part of your freestyle, such as keeping your head still during breathing or improving the transition from hand entry to the underwater pull.
A steady current also makes it easier to repeat the same drill under similar conditions. If you keep the setting and interval duration consistent, you can compare how your stroke feels from one session to another.
The important detail is the amount of resistance. A current that is too strong may force you to shorten your stroke, kick harder or rush your breathing simply to maintain position. For technical work, choose a setting that lets you concentrate on the movement instead of fighting the water.
Four Areas of Freestyle Technique Worth Working On
Body Position: Keep the Head From Leading the Stroke
A high head position can cause the hips and legs to sink, increasing drag. Some swimmers do this when looking forward; others lift the head during every breath without realising how much the rest of the body moves with it.
Start with a relaxed freestyle stroke at a low current. Look towards the bottom of the pool, keep the neck comfortable and allow the body to rotate naturally through the shoulders and hips.
Pay attention to the moment you turn to breathe. Your head should rotate with the body rather than lift independently towards the front. If your legs drop or your stroke becomes noticeably uneven during the breath, slow down and repeat the movement.
An underwater video recorded from the side can help reveal whether the head remains aligned with the spine and whether the hips stay close to the surface. These details are often harder to judge from inside the water.
The Catch: Apply Pressure in the Right Direction
The catch is the early underwater phase of freestyle, when the hand and forearm establish pressure against the water before the main pull.
Simply moving the arms faster does not guarantee effective propulsion. If the hand presses mainly downwards or slips through the water without establishing a useful catch, the swimmer may expend considerable effort without getting the expected result.
Watch three parts of the stroke:
-
Hand entry: Let the hand enter in line with the shoulder rather than crossing far over the centre of the body.
-
Forearm position: As the catch develops, allow the forearm to move towards a more vertical position. This is commonly associated with the early vertical forearm (EVF), although the precise position varies between swimmers.
-
Pull direction: Focus on applying pressure backwards through the underwater phase rather than pressing down with the palm.
Try concentrating on the catch for three short efforts, then return to relaxed freestyle. You are looking for a smoother connection between the hand, forearm and body rotation, not an exaggerated elbow angle or a harder pull.
If the current makes it difficult to feel the water, reduce the resistance. A swimmer who is struggling to hold position may compensate by rushing the stroke, making it harder to assess the catch itself.
Breathing: Look at What Happens After the Inhale
Breathing problems often affect more than the head position. A swimmer may lift the face too far out of the water, let the leading arm collapse or hurry the next stroke while trying to regain a comfortable rhythm.
Practise exhaling gradually underwater, rotating to the breathing side with the body and returning the face to the water smoothly. The movement should fit into the stroke rather than interrupt it.
After each breath, check what happens to the opposite arm and the hips. Do you lose your balance? Does the next pull become rushed? Does your body swing sideways more than usual?
These observations are more useful than simply counting how many strokes you complete before breathing.
Breathing to both sides can help reveal differences in coordination, but it does not need to be forced into every session. Choose a breathing pattern that supports your technique and training goals. If you are preparing for a specific event, practise the pattern you expect to use while still addressing any obvious imbalance.
Stroke Consistency: Notice What Changes When You Tire
Technique often looks reasonable during the first few seconds of a swim and deteriorates later. The pull becomes shorter, the recovery grows hurried or the head starts lifting more frequently.
A swim machine lets you examine this change without adding repeated wall turns to the session. Swim for 30–45 seconds at a manageable intensity, rest, then repeat with the same technical cue.
Compare the final seconds of each effort with the beginning. If your body position deteriorates or breathing becomes rushed, end the repetition or take more recovery. There is little value in extending a technical drill once you can no longer maintain the movement you are trying to practise.
It is also worth distinguishing fatigue from a technical problem. If you lose your balance immediately at a low current, you may need to work on body position or breathing before attempting longer efforts. If the movement is controlled at first but deteriorates later, interval length and recovery may need attention.
Troubleshooting Common Technique Problems
One symptom can have several causes, so use the following table as a starting point for observation rather than a definitive diagnosis.
| What you notice |
What to check |
What to try |
| Hips or legs drop when breathing |
Head lift and body rotation |
Lower the current and practise a relaxed breath with the head rotating alongside the body |
| Arms move quickly but the stroke feels weak |
Catch position and pull direction |
Focus on the hand and forearm during the early underwater stroke |
| You lose balance on one side |
Breathing comfort and left-right rotation |
Record both sides and compare the movements |
| Stroke length shortens as the interval continues |
Fatigue or excessive current |
Shorten the effort and repeat at a more manageable setting |
| You struggle to keep the same rhythm |
Current intensity and breathing timing |
Reduce the flow and return to a pace you can control |
Make one adjustment at a time. If you change your head position, breathing pattern and current setting together, it becomes difficult to tell which change helped.
Persistent problems with the catch, body alignment or asymmetrical movement are worth reviewing with a qualified swimming coach. Video can reveal a technical fault, but interpreting why it occurs may require a trained eye.
A Short Swim Machine Session for Technique Practice
A technique session does not need to be long. Around 20 minutes can provide a useful starting point if the intervals are manageable and the focus remains clear.
| Session stage |
Suggested work |
Focus |
| Warm-up |
4 minutes easy |
Settle into the current and establish a relaxed stroke |
| Body position |
3 × 40 seconds |
Head alignment and balance during breathing |
| Catch practice |
3 × 40 seconds |
Hand entry, forearm position and pull direction |
| Breathing practice |
3 × 40 seconds |
Smooth exhalation and coordinated rotation |
| Integrated freestyle |
3 × 60 seconds |
Maintain one technical cue during continuous swimming |
| Cool-down |
3 minutes easy |
Return to relaxed swimming |
Rest for around 20–30 seconds between efforts, or longer if needed. The timings are a starting point rather than a target that every swimmer should complete.
You may not need all three technique drills in every session. If breathing is your main problem, spend more time on breathing and body position instead of trying to correct the catch as well. The following session can focus on a different skill.
Keep the current setting consistent while learning a movement. Once you can repeat it without losing control, extend the interval slightly before considering a higher current.
For a broader guide to current selection, interval structure and general swim-jet workouts, see How to Train With a Swim Jet: Workouts, Current Speeds and Training Tips. This guide focuses on the technical details of the stroke, while the training article covers how to organise the wider session.
How to Tell Whether Your Technique Is Improving
Because a swim machine keeps you in roughly the same position, distance travelled is not a useful measure of progress. Focus instead on whether you can perform the intended movement more consistently under the same conditions.
For example, you might notice that your head stays more stable during breathing, that the catch remains controlled for longer or that your stroke rhythm changes less as fatigue develops.
Record the current setting, interval duration and technical focus after each session. If possible, film a short effort from the same angle every few weeks. Comparable footage is more informative than a collection of recordings taken from different positions.
Distance per stroke (DPS) is another useful concept in conventional pool swimming. It describes how far a swimmer travels per stroke or stroke cycle, depending on the measurement method. On a swim machine, however, you cannot measure it in the same straightforward way because the machine holds you in a relatively fixed position.
If your goal is faster lap swimming, check your progress in a conventional pool using consistent distances and timings. The machine can help you practise particular movements, while timed swimming shows whether those changes are translating into measurable performance.
Swim Machine Training and Conventional Pool Swimming
The two environments serve different purposes.
A swim machine is well suited to repeated technical drills, sustained swimming in a compact pool and practice at a controlled current setting. Conventional pool swimming allows you to assess forward movement, practise turns and push-offs, and measure pace over a known distance.
This difference matters when evaluating a technical adjustment. A movement that helps you hold position against a generated current may not produce the same result when swimming through still water. Checking the movement in a conventional pool helps establish whether the adjustment is useful beyond the machine.
For Australian homeowners with short backyard pools, a counter-current system can make regular practice more convenient without requiring a full-length lap lane. Swimmers preparing for pool competitions should still include conventional pool sessions in their training.
iGarden Portable Swim Jet X
Best-in-Class Water Flow: AI Inverter Tech delivers the strongest water flow in its class. 1-Min Setup: No drilling, no renovation. Clamp the jet and go. All in One: Training, playing, relaxing, experience the freedom of unlimited swimming.
Key Takeaways for Home Swimmers
1. Lower the current when your stroke starts to fall apart. If you find yourself lifting your head, shortening the pull or rushing your breathing, reduce the resistance. You should be able to practise the movement without fighting to hold your position.
2. Work on one technical problem at a time. Spend a session on body position or the catch instead of trying to change everything at once. Keep the current setting consistent and note what happens as you tire. Small, repeatable improvements are easier to recognise than a session judged by effort alone.
3. Check your technique beyond the machine. Use underwater video or ask a swimming coach to review a persistent problem. If your goal is faster lap swimming, test your progress over a consistent distance in a conventional pool. Holding your position against a current is only part of the picture.